Resetting your Holosun EPS Carry red dot sight to default configuration can be a useful tool for troubleshooting issues or simply starting fresh. The process is fairly straightforward and only requires a few simple steps. First, you'll need locating the reset button on the back of the sight. This small button is often unmarked but can be easily identified by its location.
- Beginning a factory reset, you'll need to hold down the reset button for a period of time of approximately 4 seconds. You should see a flashing indicator on the sight indicating that the reset process is in progress.
- When the reset is complete, the indicator will return to its usual pattern.
- Your Holosun EPS Carry is now restored to its original settings. You can then proceed with configuring it according to your desired setup.
It's important to check the user manual for specific instructions and details regarding your Holosun EPS Carry red dot sight.
Resetting Your Holosun EPS Carry to Factory Settings
Need to Tweak your Holosun EPS Carry Sight back to its Default configuration? It's Straightforward. Here's how:
First, ensure the Red Dot is Activated. Then, locate the Control labeled "Mode".
Press and hold this Control for approximately 3 seconds.
You should See a series of Flashes on the Display. This indicates that the EPS Carry is now Back to Factory Settings to its Default configuration.
Once complete, release the Button. Your Holosun EPS Carry is now Functional with all settings at their Factory values.
Resetting the Holosun EPS Carry Red Dot Sight
The Holosun EPS Carry Red dot sight is a popular choice for concealed carry applications due to its compact size and durable construction. However, like any optical device, it may require periodic adjustment. This can be easily accomplished by following these simple steps: First, identify the adjustment screws on the side of the sight. These are typically located near the battery compartment. Using a small screwdriver, carefully turn the screws to modify the point of impact. Start by making small adjustments and test fire the sight at various distances to ensure accuracy. Repeat this process until you achieve a desired zeroing point.
- Remember that the adjustment screws can be easily damaged if overtightened, so use caution when turning them.
- Guarantee that the battery is fresh and properly installed before making any adjustments.
- Should you encounter difficulty zeroing your sight, consult the manufacturer's guide for further assistance or contact Holosun customer support.
Revert Factory Settings for Holosun EPS Carry
To restore your Holosun EPS Carry to its factory settings, you will need to navigate through the sight's menu system. First, power up the optic by engaging the switch located at the side of the unit. Next, utilize the control buttons found upon the holographic display to access the settings menu. Within the menu, locate the "Factory Reset" option and select it using the designated button. The EPS Carry will then initiate a reset sequence, which may take a few moments. Once complete, your sight will be restored to its default configuration.
- Note: During the reset process, all user-configured settings will be erased.
Erase Your Holosun EPS Carry Quickly
Need to get your Holosun EPS Carry back to factory settings? It's easier here than you think! Here are the simple steps you need to follow:
First, turn off your red dot. Then, find the tiny reset button on the side of the sight. Use a small object like a paperclip or a pin to press and depress the reset button for about 5 seconds. You'll know it worked when the display starts flashing.
- Let the sight to cycle through its startup sequence. This might take a few moments.
- Your Holosun EPS Carry is now reset to factory default settings!
Return to Factory Settings a Holosun EPS Carry Red Dot
Need for the purpose of new configuration setup? Here's how you can to re-establish default settings your Holosun EPS Carry Red Dot.
First, ensure the red dot is activated. Next, pinpoint the tiny button on the left/right side of the sight's housing/body. Maintain a continuous press on this button for at least 5 seconds/3 seconds. You should notice a flashing light/blinking indicator indicating that the reset process has begun/started. Keep holding/pressing the button until the light stops blinking/flashing. Stop pressing the button and your Holosun EPS Carry Red Dot is now restored to factory settings.